← All videos Manufacturer platform

22 Manufacturers' Calculations in One Unit Selection

One vendor program per component, then copy and paste? In HVACinOne the manufacturers' own calculations run inside one unit calculation.

1:00

Selecting a unit often means one vendor selection program per component. The fan comes from one program, the heat recovery from another, the coil from a third. Each result is typed again into the unit calculation. When the air flow changes, every program runs again, and the coil inlet air is entered by hand.

HVACinOne runs the manufacturers' own calculations inside the unit calculation. Fans, plate and rotary heat recovery and coils use 14 manufacturer calculation libraries. The coil group also covers brazed plate heat exchangers for evaporators and condensers. Compressors use the makers' performance data for capacity, power input and COP at your operating point. Refrigeration parts use the makers' catalogue data and are rated by HVACinOne. In total that is 22 manufacturers in 6 equipment groups. Next to the coil libraries there are two in-house coil engines: one for fin-and-tube coils and one for microchannel coils. Each component is rated at the air it really sees in the unit: the coil gets the air that leaves the heat recovery.

Take a real plate heat recovery selection: one calculation, 4500 m³/h, winter 5 °C. Four brands land in one result list with the same columns. The best row per brand runs from 74.2 % to 78.7 % dry efficiency, from 19.8 °C to 20.8 °C supply air and from 45 Pa to 113 Pa pressure drop. Fans, compressors and refrigeration parts work the same way: every chosen brand, same duty, side by side.

This helps selection engineers and the product and R&D teams of HVAC manufacturers compare brands under the same conditions, without moving results between programs.

Want to see this with your own products?

We set up HVACinOne with your unit data and show the same calculation on your range.

More videos