← All videos Manufacturer platform

Spec Assistant: Check Selected Units Against the Spec

The Spec Assistant answers from the uploaded spec with page numbers, keeps team decisions and compares selected units with the spec.

0:46

A project specification usually lives in four places. The spec is a PDF in the inbox, the questions go by mail, the selected units sit in the selection tool and the decisions are in someone's memory. Values get copied by hand, and the page they came from gets lost.

HVACinOne keeps these in one project, next to the Spec Assistant. It reads PDF (scanned too), Word, Excel and images. You ask in plain words, and it answers from this project only, with the document and page behind every value. A decision is stated once and noted for the project team, and each note can be edited or deleted. Later answers use the decision but keep it apart from the spec value. The assistant also reads the selected units, from each unit's last saved calculation.

Take a sample project. Asked for filter and casing classes, the assistant answers from page 1: supply air ePM10 60 % and ePM1 80 %, extract air ePM10 50 %, casing classes D1 (M), L1 (M), F9, T2 and TB2. It notes that F9 is the filter bypass leakage class, not a filter efficiency class. The team then decides to take the supply airflow 10 % above the schedule. The next answer gives 13200 m³/h: 12000 m³/h from page 2, §4, plus 10 % as a project decision. The spec also asks for at least 75 % dry efficiency for rotary wheels. The selected rotor reaches 77.47 % in winter but 74.83 % in summer, so the answer is: not fully. Performance at the project design conditions still needs verification.

This helps selection and sales engineers at AHU and HVAC manufacturers and dealers. They check a selection against the spec and trace each value back to its page.

Want to see this with your own products?

We set up HVACinOne with your unit data and show the same calculation on your range.

More videos